This part of the documentation lists the full API reference of all public classes and functions.


click.command(name=None, cls=None, **attrs)

Creates a new Command and uses the decorated function as callback. This will also automatically attach all decorated option()s and argument()s as parameters to the command.

The name of the command defaults to the name of the function. If you want to change that, you can pass the intended name as the first argument.

All keyword arguments are forwarded to the underlying command class.

Once decorated the function turns into a Command instance that can be invoked as a command line utility or be attached to a command Group.

  • name -- the name of the command. This defaults to the function name.
  • cls -- the command class to instantiate. This defaults to Command.
click.group(name=None, **attrs)

Creates a new Group with a function as callback. This works otherwise the same as command() just that the cls parameter is set to Group.

click.argument(*param_decls, **attrs)

Attaches an argument to the command. All positional arguments are passed as parameter declarations to Argument; all keyword arguments are forwarded unchanged (except cls). This is equivalent to creating an Argument instance manually and attaching it to the Command.params list.

参数:cls -- the argument class to instantiate. This defaults to Argument.
click.option(*param_decls, **attrs)

Attaches an option to the command. All positional arguments are passed as parameter declarations to Option; all keyword arguments are forwarded unchanged (except cls). This is equivalent to creating an Option instance manually and attaching it to the Command.params list.

参数:cls -- the option class to instantiate. This defaults to Option.
click.password_option(*param_decls, **attrs)

Shortcut for password prompts.

This is equivalent to decorating a function with option() with the following parameters:

@click.option('--password', prompt=True, confirmation_prompt=True,
def changeadmin(password):
click.confirmation_option(*param_decls, **attrs)

Shortcut for confirmation prompts that can be ignored by passing --yes as parameter.

This is equivalent to decorating a function with option() with the following parameters:

def callback(ctx, param, value):
    if not value:

@click.option('--yes', is_flag=True, callback=callback,
              expose_value=False, prompt='Do you want to continue?')
def dropdb():
click.version_option(version=None, *param_decls, **attrs)

Adds a --version option which immediately ends the program printing out the version number. This is implemented as an eager option that prints the version and exits the program in the callback.

  • version -- the version number to show. If not provided Click attempts an auto discovery via setuptools.
  • prog_name -- the name of the program (defaults to autodetection)
  • message -- custom message to show instead of the default ('%(prog)s, version %(version)s')
  • others -- everything else is forwarded to option().
click.help_option(*param_decls, **attrs)

Adds a --help option which immediately ends the program printing out the help page. This is usually unnecessary to add as this is added by default to all commands unless suppressed.

Like version_option(), this is implemented as eager option that prints in the callback and exits.

All arguments are forwarded to option().


Marks a callback as wanting to receive the current context object as first argument.


Similar to pass_context(), but only pass the object on the context onwards (Context.obj). This is useful if that object represents the state of a nested system.

click.make_pass_decorator(object_type, ensure=False)

Given an object type this creates a decorator that will work similar to pass_obj() but instead of passing the object of the current context, it will find the innermost context of type object_type().

This generates a decorator that works roughly like this:

from functools import update_wrapper

def decorator(f):
    def new_func(ctx, *args, **kwargs):
        obj = ctx.find_object(object_type)
        return ctx.invoke(f, obj, *args, **kwargs)
    return update_wrapper(new_func, f)
return decorator
  • object_type -- the type of the object to pass.
  • ensure -- if set to True, a new object will be created and remembered on the context if it's not there yet.


click.echo(message=None, file=None, nl=True, err=False, color=None)

Prints a message plus a newline to the given file or stdout. On first sight, this looks like the print function, but it has improved support for handling Unicode and binary data that does not fail no matter how badly configured the system is.

Primarily it means that you can print binary data as well as Unicode data on both 2.x and 3.x to the given file in the most appropriate way possible. This is a very carefree function as in that it will try its best to not fail. As of Click 6.0 this includes support for unicode output on the Windows console.

In addition to that, if colorama is installed, the echo function will also support clever handling of ANSI codes. Essentially it will then do the following:

  • add transparent handling of ANSI color codes on Windows.
  • hide ANSI codes automatically if the destination file is not a terminal.

在 6.0 版更改: As of Click 6.0 the echo function will properly support unicode output on the windows console. Not that click does not modify the interpreter in any way which means that sys.stdout or the print statement or function will still not provide unicode support.

在 2.0 版更改: Starting with version 2.0 of Click, the echo function will work with colorama if it's installed.

3.0 新版功能: The err parameter was added.

在 4.0 版更改: Added the color flag.

  • message -- the message to print
  • file -- the file to write to (defaults to stdout)
  • err -- if set to true the file defaults to stderr instead of stdout. This is faster and easier than calling get_text_stderr() yourself.
  • nl -- if set to True (the default) a newline is printed afterwards.
  • color -- controls if the terminal supports ANSI colors or not. The default is autodetection.
click.echo_via_pager(text, color=None)

This function takes a text and shows it via an environment specific pager on stdout.

在 3.0 版更改: Added the color flag.

  • text -- the text to page.
  • color -- controls if the pager supports ANSI colors or not. The default is autodetection.
click.prompt(text, default=None, hide_input=False, confirmation_prompt=False, type=None, value_proc=None, prompt_suffix=': ', show_default=True, err=False)

Prompts a user for input. This is a convenience function that can be used to prompt a user for input later.

If the user aborts the input by sending a interrupt signal, this function will catch it and raise a Abort exception.

6.0 新版功能: Added unicode support for cmd.exe on Windows.

4.0 新版功能: Added the err parameter.

  • text -- the text to show for the prompt.
  • default -- the default value to use if no input happens. If this is not given it will prompt until it's aborted.
  • hide_input -- if this is set to true then the input value will be hidden.
  • confirmation_prompt -- asks for confirmation for the value.
  • type -- the type to use to check the value against.
  • value_proc -- if this parameter is provided it's a function that is invoked instead of the type conversion to convert a value.
  • prompt_suffix -- a suffix that should be added to the prompt.
  • show_default -- shows or hides the default value in the prompt.
  • err -- if set to true the file defaults to stderr instead of stdout, the same as with echo.
click.confirm(text, default=False, abort=False, prompt_suffix=': ', show_default=True, err=False)

Prompts for confirmation (yes/no question).

If the user aborts the input by sending a interrupt signal this function will catch it and raise a Abort exception.

4.0 新版功能: Added the err parameter.

  • text -- the question to ask.
  • default -- the default for the prompt.
  • abort -- if this is set to True a negative answer aborts the exception by raising Abort.
  • prompt_suffix -- a suffix that should be added to the prompt.
  • show_default -- shows or hides the default value in the prompt.
  • err -- if set to true the file defaults to stderr instead of stdout, the same as with echo.
click.progressbar(iterable=None, length=None, label=None, show_eta=True, show_percent=None, show_pos=False, item_show_func=None, fill_char='#', empty_char='-', bar_template='%(label)s [%(bar)s] %(info)s', info_sep=' ', width=36, file=None, color=None)

This function creates an iterable context manager that can be used to iterate over something while showing a progress bar. It will either iterate over the iterable or length items (that are counted up). While iteration happens, this function will print a rendered progress bar to the given file (defaults to stdout) and will attempt to calculate remaining time and more. By default, this progress bar will not be rendered if the file is not a terminal.

The context manager creates the progress bar. When the context manager is entered the progress bar is already displayed. With every iteration over the progress bar, the iterable passed to the bar is advanced and the bar is updated. When the context manager exits, a newline is printed and the progress bar is finalized on screen.

No printing must happen or the progress bar will be unintentionally destroyed.

Example usage:

with progressbar(items) as bar:
    for item in bar:

Alternatively, if no iterable is specified, one can manually update the progress bar through the update() method instead of directly iterating over the progress bar. The update method accepts the number of steps to increment the bar with:

with progressbar(length=chunks.total_bytes) as bar:
    for chunk in chunks:

2.0 新版功能.

4.0 新版功能: Added the color parameter. Added a update method to the progressbar object.

  • iterable -- an iterable to iterate over. If not provided the length is required.
  • length -- the number of items to iterate over. By default the progressbar will attempt to ask the iterator about its length, which might or might not work. If an iterable is also provided this parameter can be used to override the length. If an iterable is not provided the progress bar will iterate over a range of that length.
  • label -- the label to show next to the progress bar.
  • show_eta -- enables or disables the estimated time display. This is automatically disabled if the length cannot be determined.
  • show_percent -- enables or disables the percentage display. The default is True if the iterable has a length or False if not.
  • show_pos -- enables or disables the absolute position display. The default is False.
  • item_show_func -- a function called with the current item which can return a string to show the current item next to the progress bar. Note that the current item can be None!
  • fill_char -- the character to use to show the filled part of the progress bar.
  • empty_char -- the character to use to show the non-filled part of the progress bar.
  • bar_template -- the format string to use as template for the bar. The parameters in it are label for the label, bar for the progress bar and info for the info section.
  • info_sep -- the separator between multiple info items (eta etc.)
  • width -- the width of the progress bar in characters, 0 means full terminal width
  • file -- the file to write to. If this is not a terminal then only the label is printed.
  • color -- controls if the terminal supports ANSI colors or not. The default is autodetection. This is only needed if ANSI codes are included anywhere in the progress bar output which is not the case by default.

Clears the terminal screen. This will have the effect of clearing the whole visible space of the terminal and moving the cursor to the top left. This does not do anything if not connected to a terminal.

2.0 新版功能.

click.style(text, fg=None, bg=None, bold=None, dim=None, underline=None, blink=None, reverse=None, reset=True)

Styles a text with ANSI styles and returns the new string. By default the styling is self contained which means that at the end of the string a reset code is issued. This can be prevented by passing reset=False.


click.echo(click.style('Hello World!', fg='green'))
click.echo(click.style('ATTENTION!', blink=True))
click.echo(click.style('Some things', reverse=True, fg='cyan'))

Supported color names:

  • black (might be a gray)
  • red
  • green
  • yellow (might be an orange)
  • blue
  • magenta
  • cyan
  • white (might be light gray)
  • reset (reset the color code only)

2.0 新版功能.

  • text -- the string to style with ansi codes.
  • fg -- if provided this will become the foreground color.
  • bg -- if provided this will become the background color.
  • bold -- if provided this will enable or disable bold mode.
  • dim -- if provided this will enable or disable dim mode. This is badly supported.
  • underline -- if provided this will enable or disable underline.
  • blink -- if provided this will enable or disable blinking.
  • reverse -- if provided this will enable or disable inverse rendering (foreground becomes background and the other way round).
  • reset -- by default a reset-all code is added at the end of the string which means that styles do not carry over. This can be disabled to compose styles.

Removes ANSI styling information from a string. Usually it's not necessary to use this function as Click's echo function will automatically remove styling if necessary.

2.0 新版功能.

参数:text -- the text to remove style information from.
click.secho(text, file=None, nl=True, err=False, color=None, **styles)

This function combines echo() and style() into one call. As such the following two calls are the same:

click.secho('Hello World!', fg='green')
click.echo(click.style('Hello World!', fg='green'))

All keyword arguments are forwarded to the underlying functions depending on which one they go with.

2.0 新版功能.

click.edit(text=None, editor=None, env=None, require_save=True, extension='.txt', filename=None)

Edits the given text in the defined editor. If an editor is given (should be the full path to the executable but the regular operating system search path is used for finding the executable) it overrides the detected editor. Optionally, some environment variables can be used. If the editor is closed without changes, None is returned. In case a file is edited directly the return value is always None and require_save and extension are ignored.

If the editor cannot be opened a UsageError is raised.

Note for Windows: to simplify cross-platform usage, the newlines are automatically converted from POSIX to Windows and vice versa. As such, the message here will have \n as newline markers.

  • text -- the text to edit.
  • editor -- optionally the editor to use. Defaults to automatic detection.
  • env -- environment variables to forward to the editor.
  • require_save -- if this is true, then not saving in the editor will make the return value become None.
  • extension -- the extension to tell the editor about. This defaults to .txt but changing this might change syntax highlighting.
  • filename -- if provided it will edit this file instead of the provided text contents. It will not use a temporary file as an indirection in that case.
click.launch(url, wait=False, locate=False)

This function launches the given URL (or filename) in the default viewer application for this file type. If this is an executable, it might launch the executable in a new session. The return value is the exit code of the launched application. Usually, 0 indicates success.


click.launch('/my/downloaded/file', locate=True)

2.0 新版功能.

  • url -- URL or filename of the thing to launch.
  • wait -- waits for the program to stop.
  • locate -- if this is set to True then instead of launching the application associated with the URL it will attempt to launch a file manager with the file located. This might have weird effects if the URL does not point to the filesystem.

Fetches a single character from the terminal and returns it. This will always return a unicode character and under certain rare circumstances this might return more than one character. The situations which more than one character is returned is when for whatever reason multiple characters end up in the terminal buffer or standard input was not actually a terminal.

Note that this will always read from the terminal, even if something is piped into the standard input.

2.0 新版功能.

参数:echo -- if set to True, the character read will also show up on the terminal. The default is to not show it.
click.pause(info='Press any key to continue ...', err=False)

This command stops execution and waits for the user to press any key to continue. This is similar to the Windows batch "pause" command. If the program is not run through a terminal, this command will instead do nothing.

2.0 新版功能.

4.0 新版功能: Added the err parameter.

  • info -- the info string to print before pausing.
  • err -- if set to message goes to stderr instead of stdout, the same as with echo.

Returns the current size of the terminal as tuple in the form (width, height) in columns and rows.


Returns a system stream for byte processing. This essentially returns the stream from the sys module with the given name but it solves some compatibility issues between different Python versions. Primarily this function is necessary for getting binary streams on Python 3.

参数:name -- the name of the stream to open. Valid names are 'stdin', 'stdout' and 'stderr'
click.get_text_stream(name, encoding=None, errors='strict')

Returns a system stream for text processing. This usually returns a wrapped stream around a binary stream returned from get_binary_stream() but it also can take shortcuts on Python 3 for already correctly configured streams.

  • name -- the name of the stream to open. Valid names are 'stdin', 'stdout' and 'stderr'
  • encoding -- overrides the detected default encoding.
  • errors -- overrides the default error mode.
click.open_file(filename, mode='r', encoding=None, errors='strict', lazy=False, atomic=False)

This is similar to how the File works but for manual usage. Files are opened non lazy by default. This can open regular files as well as stdin/stdout if '-' is passed.

If stdin/stdout is returned the stream is wrapped so that the context manager will not close the stream accidentally. This makes it possible to always use the function like this without having to worry to accidentally close a standard stream:

with open_file(filename) as f:

3.0 新版功能.

  • filename -- the name of the file to open (or '-' for stdin/stdout).
  • mode -- the mode in which to open the file.
  • encoding -- the encoding to use.
  • errors -- the error handling for this file.
  • lazy -- can be flipped to true to open the file lazily.
  • atomic -- in atomic mode writes go into a temporary file and it's moved on close.
click.get_app_dir(app_name, roaming=True, force_posix=False)

Returns the config folder for the application. The default behavior is to return whatever is most appropriate for the operating system.

To give you an idea, for an app called "Foo Bar", something like the following folders could be returned:

Mac OS X:
~/Library/Application Support/Foo Bar
Unix (POSIX):
Win XP (roaming):
C:\Documents and Settings\<user>\Local Settings\Application Data\Foo Bar
Win XP (not roaming):
C:\Documents and Settings\<user>\Application Data\Foo Bar
Win 7 (roaming):
C:\Users\<user>\AppData\Roaming\Foo Bar
Win 7 (not roaming):
C:\Users\<user>\AppData\Local\Foo Bar

2.0 新版功能.

  • app_name -- the application name. This should be properly capitalized and can contain whitespace.
  • roaming -- controls if the folder should be roaming or not on Windows. Has no affect otherwise.
  • force_posix -- if this is set to True then on any POSIX system the folder will be stored in the home folder with a leading dot instead of the XDG config home or darwin's application support folder.
click.format_filename(filename, shorten=False)

Formats a filename for user display. The main purpose of this function is to ensure that the filename can be displayed at all. This will decode the filename to unicode if necessary in a way that it will not fail. Optionally, it can shorten the filename to not include the full path to the filename.

  • filename -- formats a filename for UI display. This will also convert the filename into unicode without failing.
  • shorten -- this optionally shortens the filename to strip of the path that leads up to it.


class click.BaseCommand(name, context_settings=None)

The base command implements the minimal API contract of commands. Most code will never use this as it does not implement a lot of useful functionality but it can act as the direct subclass of alternative parsing methods that do not depend on the Click parser.

For instance, this can be used to bridge Click and other systems like argparse or docopt.

Because base commands do not implement a lot of the API that other parts of Click take for granted, they are not supported for all operations. For instance, they cannot be used with the decorators usually and they have no built-in callback system.

在 2.0 版更改: Added the context_settings parameter.

  • name -- the name of the command to use unless a group overrides it.
  • context_settings -- an optional dictionary with defaults that are passed to the context object.
allow_extra_args = False

the default for the Context.allow_extra_args flag.

allow_interspersed_args = True

the default for the Context.allow_interspersed_args flag.

context_settings = None

an optional dictionary with defaults passed to the context.

ignore_unknown_options = False

the default for the Context.ignore_unknown_options flag.


Given a context, this invokes the command. The default implementation is raising a not implemented error.

main(args=None, prog_name=None, complete_var=None, standalone_mode=True, **extra)

This is the way to invoke a script with all the bells and whistles as a command line application. This will always terminate the application after a call. If this is not wanted, SystemExit needs to be caught.

This method is also available by directly calling the instance of a Command.

3.0 新版功能: Added the standalone_mode flag to control the standalone mode.

  • args -- the arguments that should be used for parsing. If not provided, sys.argv[1:] is used.
  • prog_name -- the program name that should be used. By default the program name is constructed by taking the file name from sys.argv[0].
  • complete_var -- the environment variable that controls the bash completion support. The default is "_<prog_name>_COMPLETE" with prog name in uppercase.
  • standalone_mode -- the default behavior is to invoke the script in standalone mode. Click will then handle exceptions and convert them into error messages and the function will never return but shut down the interpreter. If this is set to False they will be propagated to the caller and the return value of this function is the return value of invoke().
  • extra -- extra keyword arguments are forwarded to the context constructor. See Context for more information.
make_context(info_name, args, parent=None, **extra)

This function when given an info name and arguments will kick off the parsing and create a new Context. It does not invoke the actual command callback though.

  • info_name -- the info name for this invokation. Generally this is the most descriptive name for the script or command. For the toplevel script it's usually the name of the script, for commands below it it's the name of the script.
  • args -- the arguments to parse as list of strings.
  • parent -- the parent context if available.
  • extra -- extra keyword arguments forwarded to the context constructor.
name = None

the name the command thinks it has. Upon registering a command on a Group the group will default the command name with this information. You should instead use the Context's info_name attribute.

parse_args(ctx, args)

Given a context and a list of arguments this creates the parser and parses the arguments, then modifies the context as necessary. This is automatically invoked by make_context().

class click.Command(name, context_settings=None, callback=None, params=None, help=None, epilog=None, short_help=None, options_metavar='[OPTIONS]', add_help_option=True)

Commands are the basic building block of command line interfaces in Click. A basic command handles command line parsing and might dispatch more parsing to commands nested below it.

在 2.0 版更改: Added the context_settings parameter.

  • name -- the name of the command to use unless a group overrides it.
  • context_settings -- an optional dictionary with defaults that are passed to the context object.
  • callback -- the callback to invoke. This is optional.
  • params -- the parameters to register with this command. This can be either Option or Argument objects.
  • help -- the help string to use for this command.
  • epilog -- like the help string but it's printed at the end of the help page after everything else.
  • short_help -- the short help to use for this command. This is shown on the command listing of the parent command.
  • add_help_option -- by default each command registers a --help option. This can be disabled by this parameter.
callback = None

the callback to execute when the command fires. This might be None in which case nothing happens.


Returns all the pieces that go into the usage line and returns it as a list of strings.

format_epilog(ctx, formatter)

Writes the epilog into the formatter if it exists.

format_help(ctx, formatter)

Writes the help into the formatter if it exists.

This calls into the following methods:

format_help_text(ctx, formatter)

Writes the help text to the formatter if it exists.

format_options(ctx, formatter)

Writes all the options into the formatter if they exist.

format_usage(ctx, formatter)

Writes the usage line into the formatter.


Formats the help into a string and returns it. This creates a formatter and will call into the following formatting methods:


Returns the help option object.


Returns the names for the help option.


Given a context, this invokes the attached callback (if it exists) in the right way.


Creates the underlying option parser for this command.

params = None

the list of parameters for this command in the order they should show up in the help page and execute. Eager parameters will automatically be handled before non eager ones.

class click.MultiCommand(name=None, invoke_without_command=False, no_args_is_help=None, subcommand_metavar=None, chain=False, result_callback=None, **attrs)

A multi command is the basic implementation of a command that dispatches to subcommands. The most common version is the Group.

  • invoke_without_command -- this controls how the multi command itself is invoked. By default it's only invoked if a subcommand is provided.
  • no_args_is_help -- this controls what happens if no arguments are provided. This option is enabled by default if invoke_without_command is disabled or disabled if it's enabled. If enabled this will add --help as argument if no arguments are passed.
  • subcommand_metavar -- the string that is used in the documentation to indicate the subcommand place.
  • chain -- if this is set to True chaining of multiple subcommands is enabled. This restricts the form of commands in that they cannot have optional arguments but it allows multiple commands to be chained together.
  • result_callback -- the result callback to attach to this multi command.
format_commands(ctx, formatter)

Extra format methods for multi methods that adds all the commands after the options.

get_command(ctx, cmd_name)

Given a context and a command name, this returns a Command object if it exists or returns None.


Returns a list of subcommand names in the order they should appear.

result_callback = None

The result callback that is stored. This can be set or overridden with the resultcallback() decorator.


Adds a result callback to the chain command. By default if a result callback is already registered this will chain them but this can be disabled with the replace parameter. The result callback is invoked with the return value of the subcommand (or the list of return values from all subcommands if chaining is enabled) as well as the parameters as they would be passed to the main callback.


@click.option('-i', '--input', default=23)
def cli(input):
    return 42

def process_result(result, input):
    return result + input

3.0 新版功能.

参数:replace -- if set to True an already existing result callback will be removed.
class click.Group(name=None, commands=None, **attrs)

A group allows a command to have subcommands attached. This is the most common way to implement nesting in Click.

参数:commands -- a dictionary of commands.
add_command(cmd, name=None)

Registers another Command with this group. If the name is not provided, the name of the command is used.

command(*args, **kwargs)

A shortcut decorator for declaring and attaching a command to the group. This takes the same arguments as command() but immediately registers the created command with this instance by calling into add_command().

commands = None

the registered subcommands by their exported names.

group(*args, **kwargs)

A shortcut decorator for declaring and attaching a group to the group. This takes the same arguments as group() but immediately registers the created command with this instance by calling into add_command().

class click.CommandCollection(name=None, sources=None, **attrs)

A command collection is a multi command that merges multiple multi commands together into one. This is a straightforward implementation that accepts a list of different multi commands as sources and provides all the commands for each of them.


Adds a new multi command to the chain dispatcher.

sources = None

The list of registered multi commands.


class click.Parameter(param_decls=None, type=None, required=False, default=None, callback=None, nargs=None, metavar=None, expose_value=True, is_eager=False, envvar=None)

A parameter to a command comes in two versions: they are either Options or Arguments. Other subclasses are currently not supported by design as some of the internals for parsing are intentionally not finalized.

Some settings are supported by both options and arguments.

在 2.0 版更改: Changed signature for parameter callback to also be passed the parameter. In Click 2.0, the old callback format will still work, but it will raise a warning to give you change to migrate the code easier.

  • param_decls -- the parameter declarations for this option or argument. This is a list of flags or argument names.
  • type -- the type that should be used. Either a ParamType or a Python type. The later is converted into the former automatically if supported.
  • required -- controls if this is optional or not.
  • default -- the default value if omitted. This can also be a callable, in which case it's invoked when the default is needed without any arguments.
  • callback -- a callback that should be executed after the parameter was matched. This is called as fn(ctx, param, value) and needs to return the value. Before Click 2.0, the signature was (ctx, value).
  • nargs -- the number of arguments to match. If not 1 the return value is a tuple instead of single value. The default for nargs is 1 (except if the type is a tuple, then it's the arity of the tuple).
  • metavar -- how the value is represented in the help page.
  • expose_value -- if this is True then the value is passed onwards to the command callback and stored on the context, otherwise it's skipped.
  • is_eager -- eager values are processed before non eager ones. This should not be set for arguments or it will inverse the order of processing.
  • envvar -- a string or list of strings that are environment variables that should be checked.

Given a context variable this calculates the default value.


Returns the human readable name of this parameter. This is the same as the name for options, but the metavar for arguments.

process_value(ctx, value)

Given a value and context this runs the logic to convert the value as necessary.

type_cast_value(ctx, value)

Given a value this runs it properly through the type system. This automatically handles things like nargs and multiple as well as composite types.

class click.Option(param_decls=None, show_default=False, prompt=False, confirmation_prompt=False, hide_input=False, is_flag=None, flag_value=None, multiple=False, count=False, allow_from_autoenv=True, type=None, help=None, **attrs)

Options are usually optional values on the command line and have some extra features that arguments don't have.

All other parameters are passed onwards to the parameter constructor.

  • show_default -- controls if the default value should be shown on the help page. Normally, defaults are not shown.
  • prompt -- if set to True or a non empty string then the user will be prompted for input if not set. If set to True the prompt will be the option name capitalized.
  • confirmation_prompt -- if set then the value will need to be confirmed if it was prompted for.
  • hide_input -- if this is True then the input on the prompt will be hidden from the user. This is useful for password input.
  • is_flag -- forces this option to act as a flag. The default is auto detection.
  • flag_value -- which value should be used for this flag if it's enabled. This is set to a boolean automatically if the option string contains a slash to mark two options.
  • multiple -- if this is set to True then the argument is accepted multiple times and recorded. This is similar to nargs in how it works but supports arbitrary number of arguments.
  • count -- this flag makes an option increment an integer.
  • allow_from_autoenv -- if this is enabled then the value of this parameter will be pulled from an environment variable in case a prefix is defined on the context.
  • help -- the help string.
class click.Argument(param_decls, required=None, **attrs)

Arguments are positional parameters to a command. They generally provide fewer features than options but can have infinite nargs and are required by default.

All parameters are passed onwards to the parameter constructor.


class click.Context(command, parent=None, info_name=None, obj=None, auto_envvar_prefix=None, default_map=None, terminal_width=None, max_content_width=None, resilient_parsing=False, allow_extra_args=None, allow_interspersed_args=None, ignore_unknown_options=None, help_option_names=None, token_normalize_func=None, color=None)

The context is a special internal object that holds state relevant for the script execution at every single level. It's normally invisible to commands unless they opt-in to getting access to it.

The context is useful as it can pass internal objects around and can control special execution features such as reading data from environment variables.

A context can be used as context manager in which case it will call close() on teardown.

2.0 新版功能: Added the resilient_parsing, help_option_names, token_normalize_func parameters.

3.0 新版功能: Added the allow_extra_args and allow_interspersed_args parameters.

4.0 新版功能: Added the color, ignore_unknown_options, and max_content_width parameters.

  • command -- the command class for this context.
  • parent -- the parent context.
  • info_name -- the info name for this invocation. Generally this is the most descriptive name for the script or command. For the toplevel script it is usually the name of the script, for commands below it it's the name of the script.
  • obj -- an arbitrary object of user data.
  • auto_envvar_prefix -- the prefix to use for automatic environment variables. If this is None then reading from environment variables is disabled. This does not affect manually set environment variables which are always read.
  • default_map -- a dictionary (like object) with default values for parameters.
  • terminal_width -- the width of the terminal. The default is inherit from parent context. If no context defines the terminal width then auto detection will be applied.
  • max_content_width -- the maximum width for content rendered by Click (this currently only affects help pages). This defaults to 80 characters if not overridden. In other words: even if the terminal is larger than that, Click will not format things wider than 80 characters by default. In addition to that, formatters might add some safety mapping on the right.
  • resilient_parsing -- if this flag is enabled then Click will parse without any interactivity or callback invocation. This is useful for implementing things such as completion support.
  • allow_extra_args -- if this is set to True then extra arguments at the end will not raise an error and will be kept on the context. The default is to inherit from the command.
  • allow_interspersed_args -- if this is set to False then options and arguments cannot be mixed. The default is to inherit from the command.
  • ignore_unknown_options -- instructs click to ignore options it does not know and keeps them for later processing.
  • help_option_names -- optionally a list of strings that define how the default help parameter is named. The default is ['--help'].
  • token_normalize_func -- an optional function that is used to normalize tokens (options, choices, etc.). This for instance can be used to implement case insensitive behavior.
  • color -- controls if the terminal supports ANSI colors or not. The default is autodetection. This is only needed if ANSI codes are used in texts that Click prints which is by default not the case. This for instance would affect help output.

Aborts the script.

allow_extra_args = None

Indicates if the context allows extra args or if it should fail on parsing.

3.0 新版功能.

allow_interspersed_args = None

Indicates if the context allows mixing of arguments and options or not.

3.0 新版功能.

args = None

the leftover arguments.


This decorator remembers a function as callback that should be executed when the context tears down. This is most useful to bind resource handling to the script execution. For instance, file objects opened by the File type will register their close callbacks here.

参数:f -- the function to execute on teardown.

Invokes all close callbacks.

color = None

Controls if styling output is wanted or not.

command = None

the Command for this context.


The computed command path. This is used for the usage information on the help page. It's automatically created by combining the info names of the chain of contexts to the root.


Like find_object() but sets the innermost object to a new instance of object_type if it does not exist.


Exits the application with a given exit code.


Aborts the execution of the program with a specific error message.

参数:message -- the error message to fail with.

Finds the closest object of a given type.


Finds the outermost context.

forward(*args, **kwargs)

Similar to invoke() but fills in default keyword arguments from the current context if the other command expects it. This cannot invoke callbacks directly, only other commands.


Helper method to get formatted help page for the current context and command.


Helper method to get formatted usage string for the current context and command.

help_option_names = None

The names for the help options.

ignore_unknown_options = None

Instructs click to ignore options that a command does not understand and will store it on the context for later processing. This is primarily useful for situations where you want to call into external programs. Generally this pattern is strongly discouraged because it's not possibly to losslessly forward all arguments.

4.0 新版功能.

info_name = None

the descriptive information name

invoke(*args, **kwargs)

Invokes a command callback in exactly the way it expects. There are two ways to invoke this method:

  1. the first argument can be a callback and all other arguments and keyword arguments are forwarded directly to the function.
  2. the first argument is a click command object. In that case all arguments are forwarded as well but proper click parameters (options and click arguments) must be keyword arguments and Click will fill in defaults.

Note that before Click 3.2 keyword arguments were not properly filled in against the intention of this code and no context was created. For more information about this change and why it was done in a bugfix release see Upgrading to 3.2.

invoked_subcommand = None

This flag indicates if a subcommand is going to be executed. A group callback can use this information to figure out if it's being executed directly or because the execution flow passes onwards to a subcommand. By default it's None, but it can be the name of the subcommand to execute.

If chaining is enabled this will be set to '*' in case any commands are executed. It is however not possible to figure out which ones. If you require this knowledge you should use a resultcallback().


Looks up the default for a parameter name. This by default looks into the default_map if available.


Creates the formatter for the help and usage output.

max_content_width = None

The maximum width of formatted content (None implies a sensible default which is 80 for most things).


This is a dictionary which is shared with all the contexts that are nested. It exists so that click utiltiies can store some state here if they need to. It is however the responsibility of that code to manage this dictionary well.

The keys are supposed to be unique dotted strings. For instance module paths are a good choice for it. What is stored in there is irrelevant for the operation of click. However what is important is that code that places data here adheres to the general semantics of the system.

Example usage:

LANG_KEY = __name__ + '.lang'

def set_language(value):
    ctx = get_current_context()
    ctx.meta[LANG_KEY] = value

def get_language():
    return get_current_context().meta.get(LANG_KEY, 'en_US')

5.0 新版功能.

obj = None

the user object stored.

params = None

the parsed parameters except if the value is hidden in which case it's not remembered.

parent = None

the parent context or None if none exists.

protected_args = None

protected arguments. These are arguments that are prepended to args when certain parsing scenarios are encountered but must be never propagated to another arguments. This is used to implement nested parsing.

resilient_parsing = None

Indicates if resilient parsing is enabled. In that case Click will do its best to not cause any failures.

scope(*args, **kwds)

This helper method can be used with the context object to promote it to the current thread local (see get_current_context()). The default behavior of this is to invoke the cleanup functions which can be disabled by setting cleanup to False. The cleanup functions are typically used for things such as closing file handles.

If the cleanup is intended the context object can also be directly used as a context manager.

Example usage:

with ctx.scope():
    assert get_current_context() is ctx

This is equivalent:

with ctx:
    assert get_current_context() is ctx

5.0 新版功能.

参数:cleanup -- controls if the cleanup functions should be run or not. The default is to run these functions. In some situations the context only wants to be temporarily pushed in which case this can be disabled. Nested pushes automatically defer the cleanup.
terminal_width = None

The width of the terminal (None is autodetection).

token_normalize_func = None

An optional normalization function for tokens. This is options, choices, commands etc.


Returns the current click context. This can be used as a way to access the current context object from anywhere. This is a more implicit alternative to the pass_context() decorator. This function is primarily useful for helpers such as echo() which might be interested in changing it's behavior based on the current context.

To push the current context, Context.scope() can be used.

5.0 新版功能.

参数:silent -- is set to True the return value is None if no context is available. The default behavior is to raise a RuntimeError.



A unicode string parameter type which is the implicit default. This can also be selected by using str as type.

click.INT = INT

An integer parameter. This can also be selected by using int as type.


A floating point value parameter. This can also be selected by using float as type.

click.BOOL = BOOL

A boolean parameter. This is the default for boolean flags. This can also be selected by using bool as a type.

click.UUID = UUID

A UUID parameter.


A dummy parameter type that just does nothing. From a user's perspective this appears to just be the same as STRING but internally no string conversion takes place. This is necessary to achieve the same bytes/unicode behavior on Python 2/3 in situations where you want to not convert argument types. This is usually useful when working with file paths as they can appear in bytes and unicode.

For path related uses the Path type is a better choice but there are situations where an unprocessed type is useful which is why it is is provided.

4.0 新版功能.

class click.File(mode='r', encoding=None, errors='strict', lazy=None, atomic=False)

Declares a parameter to be a file for reading or writing. The file is automatically closed once the context tears down (after the command finished working).

Files can be opened for reading or writing. The special value - indicates stdin or stdout depending on the mode.

By default, the file is opened for reading text data, but it can also be opened in binary mode or for writing. The encoding parameter can be used to force a specific encoding.

The lazy flag controls if the file should be opened immediately or upon first IO. The default is to be non lazy for standard input and output streams as well as files opened for reading, lazy otherwise.

Starting with Click 2.0, files can also be opened atomically in which case all writes go into a separate file in the same folder and upon completion the file will be moved over to the original location. This is useful if a file regularly read by other users is modified.

See 文件参数 for more information.

class click.Path(exists=False, file_okay=True, dir_okay=True, writable=False, readable=True, resolve_path=False, allow_dash=False, path_type=None)

The path type is similar to the File type but it performs different checks. First of all, instead of returning an open file handle it returns just the filename. Secondly, it can perform various basic checks about what the file or directory should be.

在 6.0 版更改: allow_dash was added.

  • exists -- if set to true, the file or directory needs to exist for this value to be valid. If this is not required and a file does indeed not exist, then all further checks are silently skipped.
  • file_okay -- controls if a file is a possible value.
  • dir_okay -- controls if a directory is a possible value.
  • writable -- if true, a writable check is performed.
  • readable -- if true, a readable check is performed.
  • resolve_path -- if this is true, then the path is fully resolved before the value is passed onwards. This means that it's absolute and symlinks are resolved.
  • allow_dash -- If this is set to True, a single dash to indicate standard streams is permitted.
  • type -- optionally a string type that should be used to represent the path. The default is None which means the return value will be either bytes or unicode depending on what makes most sense given the input data Click deals with.
class click.Choice(choices)

The choice type allows a value to be checked against a fixed set of supported values. All of these values have to be strings.

See 选择选项 for an example.

class click.IntRange(min=None, max=None, clamp=False)

A parameter that works similar to click.INT but restricts the value to fit into a range. The default behavior is to fail if the value falls outside the range, but it can also be silently clamped between the two edges.

See 范围选项 for an example.

class click.Tuple(types)

The default behavior of Click is to apply a type on a value directly. This works well in most cases, except for when nargs is set to a fixed count and different types should be used for different items. In this case the Tuple type can be used. This type can only be used if nargs is set to a fixed number.

For more information see 使用元组(tuple)代替多个值的选项.

This can be selected by using a Python tuple literal as a type.

参数:types -- a list of types that should be used for the tuple items.
class click.ParamType

Helper for converting values through types. The following is necessary for a valid type:

  • it needs a name
  • it needs to pass through None unchanged
  • it needs to convert from a string
  • it needs to convert its result type through unchanged (eg: needs to be idempotent)
  • it needs to be able to deal with param and context being None. This can be the case when the object is used with prompt inputs.
convert(value, param, ctx)

Converts the value. This is not invoked for values that are None (the missing value).

envvar_list_splitter = None

if a list of this type is expected and the value is pulled from a string environment variable, this is what splits it up. None means any whitespace. For all parameters the general rule is that whitespace splits them up. The exception are paths and files which are split by os.path.pathsep by default (":" on Unix and ";" on Windows).

fail(message, param=None, ctx=None)

Helper method to fail with an invalid value message.


Returns the metavar default for this param if it provides one.


Optionally might return extra information about a missing parameter.

2.0 新版功能.

name = None

the descriptive name of this type


Given a value from an environment variable this splits it up into small chunks depending on the defined envvar list splitter.

If the splitter is set to None, which means that whitespace splits, then leading and trailing whitespace is ignored. Otherwise, leading and trailing splitters usually lead to empty items being included.


exception click.ClickException(message)

An exception that Click can handle and show to the user.

exception click.Abort

An internal signalling exception that signals Click to abort.

exception click.UsageError(message, ctx=None)

An internal exception that signals a usage error. This typically aborts any further handling.

  • message -- the error message to display.
  • ctx -- optionally the context that caused this error. Click will fill in the context automatically in some situations.
exception click.BadParameter(message, ctx=None, param=None, param_hint=None)

An exception that formats out a standardized error message for a bad parameter. This is useful when thrown from a callback or type as Click will attach contextual information to it (for instance, which parameter it is).

2.0 新版功能.

  • param -- the parameter object that caused this error. This can be left out, and Click will attach this info itself if possible.
  • param_hint -- a string that shows up as parameter name. This can be used as alternative to param in cases where custom validation should happen. If it is a string it's used as such, if it's a list then each item is quoted and separated.
exception click.FileError(filename, hint=None)

Raised if a file cannot be opened.

exception click.NoSuchOption(option_name, message=None, possibilities=None, ctx=None)

Raised if click attempted to handle an option that does not exist.

4.0 新版功能.

exception click.BadOptionUsage(message, ctx=None)

Raised if an option is generally supplied but the use of the option was incorrect. This is for instance raised if the number of arguments for an option is not correct.

4.0 新版功能.

exception click.BadArgumentUsage(message, ctx=None)

Raised if an argument is generally supplied but the use of the argument was incorrect. This is for instance raised if the number of values for an argument is not correct.

6.0 新版功能.


class click.HelpFormatter(indent_increment=2, width=None, max_width=None)

This class helps with formatting text-based help pages. It's usually just needed for very special internal cases, but it's also exposed so that developers can write their own fancy outputs.

At present, it always writes into memory.

  • indent_increment -- the additional increment for each level.
  • width -- the width for the text. This defaults to the terminal width clamped to a maximum of 78.

Decreases the indentation.


Returns the buffer contents.


Increases the indentation.

indentation(*args, **kwds)

A context manager that increases the indentation.

section(*args, **kwds)

Helpful context manager that writes a paragraph, a heading, and the indents.

参数:name -- the section name that is written as heading.

Writes a unicode string into the internal buffer.

write_dl(rows, col_max=30, col_spacing=2)

Writes a definition list into the buffer. This is how options and commands are usually formatted.

  • rows -- a list of two item tuples for the terms and values.
  • col_max -- the maximum width of the first column.
  • col_spacing -- the number of spaces between the first and second column.

Writes a heading into the buffer.


Writes a paragraph into the buffer.


Writes re-indented text into the buffer. This rewraps and preserves paragraphs.

write_usage(prog, args='', prefix='Usage: ')

Writes a usage line into the buffer.

  • prog -- the program name.
  • args -- whitespace separated list of arguments.
  • prefix -- the prefix for the first line.
click.wrap_text(text, width=78, initial_indent='', subsequent_indent='', preserve_paragraphs=False)

A helper function that intelligently wraps text. By default, it assumes that it operates on a single paragraph of text but if the preserve_paragraphs parameter is provided it will intelligently handle paragraphs (defined by two empty lines).

If paragraphs are handled, a paragraph can be prefixed with an empty line containing the \b character (\x08) to indicate that no rewrapping should happen in that block.

  • text -- the text that should be rewrapped.
  • width -- the maximum width for the text.
  • initial_indent -- the initial indent that should be placed on the first line as a string.
  • subsequent_indent -- the indent string that should be placed on each consecutive line.
  • preserve_paragraphs -- if this flag is set then the wrapping will intelligently handle paragraphs.


class click.OptionParser(ctx=None)

The option parser is an internal class that is ultimately used to parse options and arguments. It's modelled after optparse and brings a similar but vastly simplified API. It should generally not be used directly as the high level Click classes wrap it for you.

It's not nearly as extensible as optparse or argparse as it does not implement features that are implemented on a higher level (such as types or defaults).

参数:ctx -- optionally the Context where this parser should go with.
add_argument(dest, nargs=1, obj=None)

Adds a positional argument named dest to the parser.

The obj can be used to identify the option in the order list that is returned from the parser.

add_option(opts, dest, action=None, nargs=1, const=None, obj=None)

Adds a new option named dest to the parser. The destination is not inferred (unlike with optparse) and needs to be explicitly provided. Action can be any of store, store_const, append, appnd_const or count.

The obj can be used to identify the option in the order list that is returned from the parser.

allow_interspersed_args = None

This controls how the parser deals with interspersed arguments. If this is set to False, the parser will stop on the first non-option. Click uses this to implement nested subcommands safely.

ctx = None

The Context for this parser. This might be None for some advanced use cases.

ignore_unknown_options = None

This tells the parser how to deal with unknown options. By default it will error out (which is sensible), but there is a second mode where it will ignore it and continue processing after shifting all the unknown options into the resulting args.


Parses positional arguments and returns (values, args, order) for the parsed options and arguments as well as the leftover arguments if there are any. The order is a list of objects as they appear on the command line. If arguments appear multiple times they will be memorized multiple times as well.


class click.testing.CliRunner(charset=None, env=None, echo_stdin=False)

The CLI runner provides functionality to invoke a Click command line script for unittesting purposes in a isolated environment. This only works in single-threaded systems without any concurrency as it changes the global interpreter state.

  • charset -- the character set for the input and output data. This is UTF-8 by default and should not be changed currently as the reporting to Click only works in Python 2 properly.
  • env -- a dictionary with environment variables for overriding.
  • echo_stdin -- if this is set to True, then reading from stdin writes to stdout. This is useful for showing examples in some circumstances. Note that regular prompts will automatically echo the input.

Given a command object it will return the default program name for it. The default is the name attribute or "root" if not set.

invoke(cli, args=None, input=None, env=None, catch_exceptions=True, color=False, **extra)

Invokes a command in an isolated environment. The arguments are forwarded directly to the command line script, the extra keyword arguments are passed to the main() function of the command.

This returns a Result object.

3.0 新版功能: The catch_exceptions parameter was added.

在 3.0 版更改: The result object now has an exc_info attribute with the traceback if available.

4.0 新版功能: The color parameter was added.

  • cli -- the command to invoke
  • args -- the arguments to invoke
  • input -- the input data for sys.stdin.
  • env -- the environment overrides.
  • catch_exceptions -- Whether to catch any other exceptions than SystemExit.
  • extra -- the keyword arguments to pass to main().
  • color -- whether the output should contain color codes. The application can still override this explicitly.
isolated_filesystem(*args, **kwds)

A context manager that creates a temporary folder and changes the current working directory to it for isolated filesystem tests.

isolation(*args, **kwds)

A context manager that sets up the isolation for invoking of a command line tool. This sets up stdin with the given input data and os.environ with the overrides from the given dictionary. This also rebinds some internals in Click to be mocked (like the prompt functionality).

This is automatically done in the invoke() method.

4.0 新版功能: The color parameter was added.

  • input -- the input stream to put into sys.stdin.
  • env -- the environment overrides as dictionary.
  • color -- whether the output should contain color codes. The application can still override this explicitly.

Returns the environment overrides for invoking a script.

class click.testing.Result(runner, output_bytes, exit_code, exception, exc_info=None)

Holds the captured result of an invoked CLI script.

exc_info = None

The traceback

exception = None

The exception that happend if one did.

exit_code = None

The exit code as integer.


The output as unicode string.

output_bytes = None

The output as bytes.

runner = None

The runner that created the result